Home > News > Content

Other Police Military Army Concealed Bulletproof Bullet Proof Vests

Nov 06, 2020

Other police military army concealed bulletproof bullet proof vests

                    

For the Other police military army concealed bulletproof bullet proof vests, it can be divided into four level according to the bullet proof performance of the bulletproof vest.

 

The level 4 bullet proof vest:

 

Function and application:

Ergonomic design, with mlloe system, reserved compartment, can be equipped with bulletproof chip, stab proof board; can carry a variety of fittings, etc., the vest can be free to stick and dismantle the ventilation net pad, which can be used in different areas and environments. At the same time, it has a combination of ventilation and heat dissipation, tightness adjustment and single police equipment.

 

Product application:

 

It is widely used in daily duties and tasks of public security police, special police, traffic patrol police, security and stability maintenance, armed police force and other national administrative law enforcement organs. In case of emergency, it can be used to ensure the safety of personnel at any time.

 

Main technical parameters:

 

Executive standard:

< < GA 141-2010 police bulletproof vest > >

 

Protection level:

Grade 4 of Ministry of public security

 

Chip structure:

the structure of the basic soft bulletproof vest is: high performance polyethylene fiber weft free cloth + aramid woven fabric. The bulletproof insert plate is composed of ceramic and polyethylene fiber weft free cloth laminate, with an overall dimension of 250mm * 300mm * 16mm.

 

Protection area:

the area of soft bullet proof vest of foundation shall not be less than 0.31 m2;

 

Bullet proof performance test of basic bulletproof vest:

it can effectively prevent the penetration of type 54 7.62mm light submachine gun and type 51 7.62mm pistol bullet (lead core). In the test of normal temperature, immersion, high temperature, low temperature and damp heat, the depression depth of back lining is less than 25mm;

 

The bullet proof performance test of bulletproof clothing with insert plate:

it can effectively prevent the penetration of type 79 7.62mm light submachine gun and 1951 type B 7.62mm pistol bullet (steel core). In the test of room temperature, immersion, high temperature, low temperature and damp heat, the depth of back lining depression is less than 25mm;

 

Description of bulletproof vest:

bulletproof vest is composed of a jacket and a bulletproof liner. The vest can be replaced and removed for cleaning. It is waterproof and UV resistant. The jacket is made of high-strength flame-proof nylon fabric, which can be adjusted in size and does not affect the activity. Both sides of the shoulder strap have Velcro design and adjustable length. Velcro and plug-in pocket are attached at the front and back of the vest, which can be pasted with logo and put in a higher level Other protective plugboard.

 

you can also see my last several articles and know more about the bullet proof vest at: https://www.senken-international.com/news_detail/How_to_Select_a_Bullet_Proof_Vest___.html

or at: https://www.senkencorp.com/news/other-police-tactical-vest-39385523.html


The level 5 bulletproof vest:

 

Function and application:

Ergonomic design, with mlloe system, reserved compartment, can be equipped with bulletproof chip, stab proof board; can carry a variety of fittings, etc., the vest can be free to stick and dismantle the ventilation net pad, which can be used in different areas and environments. At the same time, it has a combination of ventilation and heat dissipation, tightness adjustment and single police equipment.

 

Product application:

It is widely used in daily duties and tasks of public security police, special police, traffic patrol police, security and stability maintenance, armed police force and other national administrative law enforcement organs. In case of emergency, it can be used to ensure the safety of personnel at any time.

 

Main technical parameters:

 

Executive standard:

< < GA 141-2010 police bulletproof vest > >

 

Protection level:

Grade 5 of Ministry of public security

 

Chip structure:

the structure of the basic soft bulletproof vest is: high performance polyethylene fiber weft free cloth + aramid woven fabric. The bulletproof insert plate is composed of ceramic and polyethylene fiber weft free cloth laminate, with an overall dimension of 250mm * 300mm * 17mm.

 

Protection area:

the area of soft bullet proof vest of foundation shall not be less than 0.3 m2;

 

Bullet proof performance test of basic bulletproof vest:

it can effectively prevent the penetration of type 54 7.62mm light submachine gun and type 51 7.62mm pistol bullet (lead core). In the test of normal temperature, immersion, high temperature, low temperature and damp heat, the depression depth of back lining is less than 25mm;

 

Bullet proof performance test of bulletproof clothing with insert plate:

it can effectively prevent the use of 1956 type 7.62mm semi-automatic rifle and 1956 type 7.62mm ordinary ammunition (steel core) in the test, penetration, immersion, high temperature, low temperature, humidity and heat test, the depth of backing depression is less than 25mm;

 

Description of bulletproof vest:

bulletproof vest is composed of a jacket and a bulletproof liner. The vest can be replaced and removed for cleaning. It is waterproof and UV resistant. The jacket is made of high-strength flame-proof nylon fabric, which can be adjusted in size and does not affect the activity. Both sides of the shoulder strap have Velcro design and adjustable length. Velcro and plug-in pocket are attached at the front and back of the vest, which can be pasted with logo and put in a higher level Other protective plugboard.

 

The level 6 bullet proof vest:

 

Function and application:

Ergonomic design, with mlloe system, reserved compartment, can be equipped with bulletproof chip, stab proof board; can carry a variety of fittings, etc., the vest can be free to stick and dismantle the ventilation net pad, which can be used in different areas and environments.At the same time, it has a combination of ventilation and heat dissipation, tightness adjustment and single police equipment.

 

Product application:

It is widely used in daily duties and tasks of public security police, special police, traffic patrol police, security and stability maintenance, armed police force and other national administrative law enforcement organs. In case of emergency, it can be used to ensure the safety of personnel at any time.

 

Main technical parameters:

 

Executive standard:

< < GA 141-2010 police bulletproof vest > >

 

Protection level:

Grade 6 of Ministry of public security

 

Chip structure:

the structure of the basic soft bulletproof vest is: high performance polyethylene fiber weft free cloth + aramid woven fabric. The bulletproof insert plate is composed of ceramic and polyethylene fiber weft free cloth laminate, with an overall dimension of 250mm * 300mm * 26mm.

 

Protection area:

the area of soft bullet proof vest of foundation shall not be less than 0.30 m2;

 

Bullet proof performance test of basic bulletproof vest:

it can effectively prevent the penetration of type 54 7.62mm light submachine gun and type 51 7.62mm pistol bullet (lead core). In the test of normal temperature, immersion, high temperature, low temperature and damp heat, the depression depth of back lining is less than 25mm;

 

Bullet proof performance test of bulletproof clothing with insert plate:

it can effectively prevent the use of 1979 type 7.62mm sniper rifle and 1953 type 7.62mm ordinary bullet (steel core) for test. In the test of room temperature, immersion, high temperature, low temperature and damp heat, the depth of the back lining depression is less than 25mm;

 

Description of bulletproof vest:

bulletproof vest is composed of a jacket and a bulletproof liner. The vest can be replaced and removed for cleaning. It is waterproof and UV resistant. The jacket is made of high-strength flame-proof nylon fabric, which can be adjusted in size and does not affect the activity. Both sides of the shoulder strap have Velcro design and adjustable length. Velcro and plug-in pocket are attached at the front and back of the vest, which can be pasted with logo and put in a higher level Other protective plugboard.


So. Maybe you also have other ideas and you have your own suggestions in this area. Any I hope we can give you the Valuable information. Please see all the details of SENKEN at

Official website: https://www.senken-international.com/

Facebook: https://www.facebook.com/SENKENCHINA

Linkedin: https://www.linkedin.com/company/senken-group-co-ltd/

Twitterhttps://twitter.com/SenkenGroup

YouTubehttps://www.youtube.com/channel/UCsI0ZLvIXOCw-ksm83rBB0g

International call0086-577- 88098289

Email: export@senken.com.cn

And feel free to ask any questions our customer service department will give you the best service.